


Charcoal External Wall Cladding (QLD)
|
Size: |
219mmx28mmx2900mm , 219mmx28mmx5400mm |
|
Lengths: |
2000mm, 3000mm, 5400mm |
|
Embossing: |
Lines Finish |
|
Side View: |
|
SHIPPING & RETURNS
Shipping and returns depends on the products and are specified for each products separately in their catalogues. For further clarifications, the team is always happy to help and guide. Reach out to us via phone call or email, visit Contact Us.
Choose options



With Joist
(Note: Pls use joist if the wall is not even and smooth)
Without Joist
(Note: Before installation, please make sure the wall is smooth and solid.)
Installation Guide
Disclaimers: Please read the installation guide carefully, all damage caused by faulty installation is not covered by the warranty

Cladding Installation

Cladding Video
Maintenance Guide
Please clean the cladding with a soft mop or brush and warm soapy water only.
Do not use strong chemicals or high-pressure washing, as this may damage the surface finish and cause permanent marks.
Use a hard brush dipped in warm soapy water and scrub to dislodge dust and dirt.
Scrub with a general wood/mildew cleaner, or use a mild bleach solution and rinse or wipe clean.
For chalky stains, use a bleaching agent mixed with warm soapy water to scrub and lift marks.
Apply calcium chloride or rock salt to melt ice/snow, then wash with hot soapy water.
Apply a detergent containing oxalic or phosphoric acid, allow 10–15 min working time, then wipe/clean.
As soon as possible, use household cleaners with hot soapy water and scrub to remove grease/oil.
Mix bleach-based stain agents with hot soapy water to dilute and then wipe the stain.
These may not fully remove; try bleach based agents with hot soapy water to dilute and clean.
Note: This stain-removal approach reflects the THQ cladding maintenance tables for external PVC/WPC cladding profiles and is generally consistent across their external wall cladding ranges.

