INDOOR WPC WALL CLADDING
HP Black and Brown
Wall panel Size: 168*24*2900mm
L corner size: 30*30*2900mm
HP Brown
Wall panel Size: 160x24x2900mm
Edge cover Size: 35x45x2900mm
HP Royal Black
Wall panel Size: 168*24*2900mm
L corner size: 30*30*2900m m
Round Slat - Leather
Wall panel Size:160*15*2900mm
L corner size: 30*30*2900mm
Round Slat - Ash
Wall panel Size: 160*15*2900mm
L corner size: 30*30*2900mm
Round Slat - Cream
Wall panel Size: 160*15*2900mm
L corner size: 30*30*2900mm
Five Pier - Metallic
Wall panel Size: 150*9*2900mm
L corner size: 30*30*2900mm
Wide slat - Gray Leather
Wall panel Size: 195*12*2900mm
L corner size: 30*30*2900mm
Wide slat - Golden tan
Wall panel Size: 195*12*2900mm
L corner size: 30*30*2900mm
Six Pier - Venilla
Wall panel Size: 170*18*2900mm
L corner size: 30*30*2900mm
INSTALLATION GUIDE
MAIN COMPONENTS
Without Joist
(Note: Before installation, please make sure the wall is smooth and solid.)
PVC wall panel
Edge cover
Nail free glue
Cutting Saw
SS clip
Level
Nail gun
Nail: F Brad - Gauge 18
Measure tape
With Joist
(Note: Pls use joist if the wall is not even and smooth)
Hammer
expansion screw
Electric drill
Timber Joist
Accessories
We supply professional installationtools and accessories, plscontactusfor more information.
Nail Free Glue
Caulking Gun
304SS Clip
Place the first wall panel on the wall with its tongue side flush with the wall edge
Note: Wall panels can be installed by liquid nail + clip + screws, can make panels fixed more strongly.
Use an nail gun to fix the panel to the wall with nails seated at the tongue at an interval of 350 mm.
Note: Nail span can be 500mm if liquid nail used on the back of the wall panel.
On the other side, attach clips to the panel at an interval of 350 mm, then fix them to the wall with an air nailer.
Note: Clip span can be 500mm if liquid nail used on the back of the wall panel.
Snap the second panel into place,the tongue of the second panel should fit into the groove of the first. Finish the rest in the same manner.
Around the corner, cut the panel to a suitable width.
Fix it to the wall with an air nailer
Complete the rest in the same manner and apply glue on the L-corner and attach it around the corner
Installation finished.