Co-extrusion

The Do's And Don'ts

1. You may notice a slight variation in colour during the first month of use. This is normal.

2. Profiles must be stored in a dry and ventilated environment, away from direct exposure to sunlight.

Store and transport the profile horizontally

When handling long profiles (>2m) seek the help of a second person

3. Exercise caution when using electrical products and power tools outdoors.

Please strictly follow the manufacturer’s safety instructions and never use electrical equipmentoutdoors when it is raining.

INSTALLATION GUIDE

Disclaimers: Pls read the instllation guide carefully, all damage caused by faulty installtion is not covered by the warranty

MAINTENANCE GUIDE

pls clean the decking with a mop or brush and warm soapy water, never use any strong decontamination and high-pressure wash, it will demage the wpc embossing and leave the marks that can't be removed.

The types of stains	Solution
Dust and dirt	use a hard brush dipped in warm soapy water to remove it.
Mildew	Scrub with ordinary wood mold class agents, or bleach to rinse or wipe it directly.
Chalk stains	In addition to the white chalk, other colors can not be removed once the printing, you can use bleaching agent with hop soapy water to scratch it
Ice or snow	Apply calcium chloride or rock salt, it can melt ice or snow. Then you can use hot soapy water to wash it.
Stain,soil and dirts	Apply detergent, which contains oxalic acid or phosphoric acid. Wiping the stain for 10-15 minutes, you can remove stains.
Greasy and Oil-based Stains	Once a greasy stain, please immediately use household cleaning products with hot soapy water to wash it.
Juice and wine stains	Mix the bleach stains agents and hot soapy water to dilute the stain and then wipe the stain.
Ink stains	Ink stains may not be removed. Mix bleach stains agents and hot soapy water to dilute the stain.