Acoustic Walnut Edge Cover
Complete your acoustic panel installation with a clean, professional finish using the THQ Acoustic Panel Edge Cover in Walnut. Designed specifically as a trim accessory for THQ's acoustic wall panel system, this edge cover delivers a seamless, polished look wherever panels meet a wall, ceiling, or adjoining surface.
Product Specifications
- Colour/Finish: Walnut
- Thickness: 25mm
- Depth: 22mm
- Length: 2700mm (2.7m per length)
- Material: Acoustic-grade composite trim
- Application: Panel termination, butt joints, perimeter edges
Key Features & Benefits
- Perfect Panel Termination — Provides a neat, finished edge wherever your acoustic panels end, eliminating raw or exposed panel edges
- Butt Joint Solution — Can be used as a butt joint cover between two panels, creating a clean transition and hiding any gap or alignment variation
- Colour-Matched Walnut Finish — Seamlessly blends with THQ Walnut acoustic panels for a cohesive, warm, premium look
- 2700mm Length — Full-length coverage minimises joins and reduces installation time
- Easy to Cut and Install — Suitable for both DIY and trade installers; can be cut to length on site
Typical Applications
- Perimeter edge finishing at walls, ceilings, and floors
- Panel-to-panel butt joints for a flush, seamless appearance
- Corner terminations in home theatres, music rooms, offices, and commercial fit-outs
- Anywhere a clean, professional ending is required for your acoustic panel installation
Melbourne Pickup & Victoria-Wide Delivery
Pickup available from Somerton, Cranbourne West, Pakenham, and Truganina. Delivery across Victoria.
Call THQ on 1800 084 700 for expert advice. Shop online at thq.com.au.
SHIPPING & RETURNS
Shipping and returns depends on the products and are specified for each products separately in their catalogues. For further clarifications, the team is always happy to help and guide. Reach out to us via phone call or email, visit Contact Us.
Choose options
Installation Guide
Disclaimers: Please read the installation guide carefully, all damage caused by faulty installation is not covered by the warranty
Internal Cladding Installation
External Cladding Installation
Maintenance Guide
Please clean the cladding with a soft mop or brush and warm soapy water only.
Do not use strong chemicals or high-pressure washing, as this may damage the surface finish and cause permanent marks.
Use a hard brush dipped in warm soapy water and scrub to dislodge dust and dirt.
Scrub with a general wood/mildew cleaner, or use a mild bleach solution and rinse or wipe clean.
For chalky stains, use a bleaching agent mixed with warm soapy water to scrub and lift marks.
Apply calcium chloride or rock salt to melt ice/snow, then wash with hot soapy water.
Apply a detergent containing oxalic or phosphoric acid, allow 10–15 min working time, then wipe/clean.
As soon as possible, use household cleaners with hot soapy water and scrub to remove grease/oil.
Mix bleach-based stain agents with hot soapy water to dilute and then wipe the stain.
These may not fully remove; try bleach based agents with hot soapy water to dilute and clean.
Note: This stain-removal approach reflects the THQ cladding maintenance tables for external PVC/WPC cladding profiles and is generally consistent across their external wall cladding ranges.