Acoustic Panel Edge Cover – Teak (QLD)
Finish your acoustic panel installation with precision using the THQ Acoustic Panel Edge Cover in Teak. Designed to complement THQ's Teak acoustic wall panels, this trim piece delivers a clean, professional edge — whether used as a perfect ending trim at wall terminations or as a butt joint cover where two panel runs meet. Ideal for home theatres, music rooms, offices, and commercial fit-outs across Melbourne and Victoria.
Product Specifications
- Colour/Finish: Teak
- Thickness: 25mm
- Depth: 22mm
- Length: 2700mm (2.7m per length)
- Application: Edge termination and butt joint cover for acoustic wall panels
- Warranty: 1-year workmanship warranty when installed by a THQ Certified Installer.
Key Features & Benefits
- Perfect Ending Trim — Creates a neat, finished edge at wall ends, door frames, and panel terminations
- Butt Joint Cover — Seamlessly conceals joins where two acoustic panel lengths meet end-to-end
- Matched Teak Finish — Precisely colour-matched to THQ Teak acoustic panels for a cohesive, premium look
- 2700mm Length — Full-length coverage minimising joins on standard ceiling-height walls
- 25mm Thick Profile — Robust 25mm × 22mm section that sits flush and holds its form over time
- Lightweight & Easy to Install — Suitable for DIY and trade installations; cuts cleanly with standard mitre saw
Ideal Applications
- Edge termination at wall ends, corners, door frames, and window reveals
- Butt joint cover where acoustic panel lengths meet on long feature walls
- Home theatres, entertainment rooms, and music studios
- Home offices, commercial offices, restaurants, and hospitality venues across Melbourne and Victoria
Installation Tip
For a seamless result, install the Edge Cover before fitting adjacent panels. When used as a butt joint, ensure panel ends are cut square and butted firmly against the cover profile. Adhesive or concealed fasteners recommended — refer to THQ installation guidelines.
Brisbane Pickup & Queensland-Wide Delivery
Pickup available from our Brisbane warehouse. We deliver across Queensland including Brisbane CBD, Gold Coast, Sunshine Coast, Toowoomba, Cairns, Townsville, and Rockhampton.
Call THQ on 1800 084 700 for expert advice. Shop online at thq.com.au.
SHIPPING & RETURNS
Shipping and returns depends on the products and are specified for each products separately in their catalogues. For further clarifications, the team is always happy to help and guide. Reach out to us via phone call or email, visit Contact Us.
Choose options
Installation Guide
Disclaimers: Please read the installation guide carefully, all damage caused by faulty installation is not covered by the warranty
Internal Cladding Installation
External Cladding Installation
Maintenance Guide
Please clean the cladding with a soft mop or brush and warm soapy water only.
Do not use strong chemicals or high-pressure washing, as this may damage the surface finish and cause permanent marks.
Use a hard brush dipped in warm soapy water and scrub to dislodge dust and dirt.
Scrub with a general wood/mildew cleaner, or use a mild bleach solution and rinse or wipe clean.
For chalky stains, use a bleaching agent mixed with warm soapy water to scrub and lift marks.
Apply calcium chloride or rock salt to melt ice/snow, then wash with hot soapy water.
Apply a detergent containing oxalic or phosphoric acid, allow 10–15 min working time, then wipe/clean.
As soon as possible, use household cleaners with hot soapy water and scrub to remove grease/oil.
Mix bleach-based stain agents with hot soapy water to dilute and then wipe the stain.
These may not fully remove; try bleach based agents with hot soapy water to dilute and clean.
Note: This stain-removal approach reflects the THQ cladding maintenance tables for external PVC/WPC cladding profiles and is generally consistent across their external wall cladding ranges.