Artificial Turf Installation Guide: Transform Your Lawn in 5 Easy Steps
Let’s be honest — keeping real grass green in Australia isn’t easy. Between water restrictions, scorching summers, and unpredictable rain, maintaining a perfect lawn can feel like a full-time job. That’s why more homeowners in places like Toowoomba, Truganina, and Brisbane are switching to artificial grass. It looks just as good as the real thing but takes a fraction of the effort to keep it that way.
If you’ve been thinking about upgrading your yard, this guide will walk you through five simple steps to get your turf installed — no professional skills required.
Step 1: Pick the Right Turf for Your Home
Before you start digging, it’s worth spending a little time choosing the right type of turf.
Artificial grass comes in different styles and pile heights. Some feel soft and lush — perfect if you’ve got kids or pets — while others are tougher for areas that get more foot traffic.
If you’re in Toowoomba, check with local artificial grass toowoomba who can help you find a blend that suits your lifestyle and budget. Many homeowners also look at trusted names like Golden Turf Truganina, known for realistic turf that holds up beautifully in the Aussie climate.
When in doubt, grab a few samples. Lay them out under sunlight and pick the one that feels and looks the most natural.
Step 2: Prepare and Level the Ground
Preparation is half the job. Start by removing the existing grass, roots, and any debris. A flat, clean surface is key to getting a neat finish.
Once that’s done, add a layer of crushed rock or road base — around 60 to 80mm thick. Compact it firmly with a plate compactor or hand roller. This base layer improves drainage and keeps your lawn even, no matter how heavy the rain gets.
Tip: Slightly slope the base away from your house so water runs off easily. It’s a small detail, but it saves trouble later.
Step 3: Install a Weed Barrier and Smooth Sand Layer
No one wants weeds sneaking through their brand-new turf. Before laying the grass, spread a weed-control membrane across the surface.
Then, pour about 10–15mm of fine crusher dust or sand and spread it evenly with a rake. Compact this layer once more — it should feel firm underfoot but not rock hard.
If you’ve got a larger project, you might even talk to a composite decking installer in Brisbane. Many of them handle turf and decking together — so your patio and lawn get a seamless finish.
Step 4: Roll Out and Secure the Turf
Now comes the satisfying bit. Roll out your artificial grass and let it rest for a few hours. This helps it relax and flatten after being tightly rolled up.
Make sure the blades of grass all lean in the same direction for a natural, consistent look. Use a sharp knife to trim the edges neatly around corners and borders.
To secure it, join the seams using adhesive turf tape and fasten the edges with galvanised nails or turf pins every 15–20cm. Don’t hammer too deep — you just want them snug.
Step 5: Brush, Fill, and Bring It to Life
Once your turf is laid, it’s time to give it that finishing touch. Use a stiff broom to brush against the grain of the grass — this lifts the fibres and makes the lawn look full and lively.
Then, spread silica sand evenly across the surface (about 10–12 kg per square metre). This adds weight, improves drainage, and keeps the blades standing upright.
After brushing the sand in, take a step back — your new lawn is ready to enjoy!
Why More Aussies Are Switching to Artificial Grass
Beyond the clean look, artificial grass is about convenience. It stays green no matter the season, doesn’t need mowing, and saves heaps on water bills.
In Toowoomba, where summers can be tough, or Truganina, where soil quality isn’t ideal for real turf, synthetic lawns offer a lasting, no-fuss solution.
Plus, they’re perfect for families — safe for pets, easy to clean, and no muddy patches after a downpour. Whether you’re redoing your backyard, around your pool, or even your front lawn, it’s a choice that saves time and keeps your home looking sharp.
